![王京陽[中國科學院金屬研究所研究員]](/img/7/461/nBnauM3X4ETNzIzN1czNxMDN0UTMyITNykTO0EDMwAjMwUzL3czLxEzLt92YucmbvRWdo5Cd0FmLzE2LvoDc0RHa.jpg "王京陽[中國科學院金屬研究所研究員]")
簡歷
教育經歷
1988.09-1992.07 北京大學物理學院，學士學位
1992.09-1995.07 中國科學院金屬研究所材料物理專業，碩士學位
1995.09-1998.07 中國科學院金屬研究所材料物理專業，博士學位
工作經歷
1998.07-2002.03 中國科學院金屬研究所，助理研究員
2002.03-2006.09 中國科學院金屬研究所，副研究員
2006.09- 中國科學院金屬研究所，研究員
2007.01-2007.12 日本國立材料科學研究所國際青年科學家中心（NIMS/ICYS）, 研究員
承擔科研項目情況
1.陶瓷材料結構與性能的電子、原子尺度模擬方法
2.層狀過渡金屬碳/氮化物新材料最佳化設計和製備
3.低熱導率熱/環障結構-功能一體化陶瓷新材料的預測與製備
社會任職
【1】物理學會內耗與力學譜專業委員會，專業委員會副主任、委員；
【2】中國材料研究會青年工作委員會，理事；
【3】中國矽酸鹽學會測試技術分會，理事；
【4】《Journal of Materials Science and Technology》雜誌，編委。
獲獎及榮譽
【1】獎勵名稱：高性能***熱透波機理及熱透波材料基礎研究
獎勵等級：國家科學技術進步獎二等獎
獲獎日期：2011年12月
【2】 獎勵名稱：高性能***熱透波機理及熱透波材料基礎研究
獎勵等級：國家工業和信息化部科學技術進步一等獎
獲獎日期：2010年12月
【3】獎勵名稱：三元層狀可加工陶瓷的製備、多層次結構和性能關係及材料設計
獎勵等級：遼寧省自然科學一等獎
獲獎日期：2006年02月
【4】獎勵名稱：Global Star Award
獎勵來源：美國陶瓷學會工程陶瓷部頒發
獲獎日期：2012年01月
【5】榮譽名稱：遼寧省“百千萬人才工程”千人層次人選
榮譽來源：遼寧省人力資源和社會保障廳等六個單位聯合授予
授予日期：2011年09月
代表論著
2003年~2012年：
[1] Z. Li, B. Liu, J. M. Wang, L. C. Sun, J. Y. Wang and Y. C. Zhou, “Mechanism of intrinsic point defects and oxygen diffusion in yttrium aluminum garnet: first-principles investigation”, J. Am. Ceram
[2] L. C. Sun, B. Liu, J. M. Wang, J. Y. Wang, Y. C. Zhou and Z. J. Hu, “Y4Si2O7N2: a new oxynitride with low thermal conductivity”, J. Am. Ceram
[3] X. Zhan, Z. Li, Z. H. Gao, L. Y. Zheng, X. H. Wang, J. Y. Wang and Y. C. Zhou, “Strengthening Ti3AlC2 by in situ synthesizing Ti3AlC2-Y4Al2O9 composites”, J. Am. Ceram
[4] B. Liu, J. M. Wang, F. Z. Li, J. Y. Wang and Y. C. Zhou, “Mechanisms of mono-vacancy and oxygen permeability in yttrium orthosilicate studied by first-principles calculation”, J. Am. Ceram
[5] F. Z. Li, H. Q. Nian, K. Du, J. M. Wang, J. Y. Wang and Y. C. Zhou, “Direct observation of a screw dislocation normal to the beam by Z-contrast STEM”, J. Am. Ceram. Soc
[6] X. Zhan, Z. Li, B. Liu, J. Y. Wang and Y. C. Zhou, “Theoretical prediction of elastic stiffness and minimum lattice thermal conductivity of Y3Al5O12, YAlO3 and Y4Al2O9”, J. Am. Ceram. So
[7] H. M. Xiang, X. H. Wang, J. Y. Wang and Y. C. Zhou, “Physical insight of superconductivity of Nb2AlC: in situ Raman spectrometry investigation”, J. Raman Spectroscopy
[8] L. Y. Zheng, J. Y. Wang, J. X. Chen, and Y. C. Zhou, “Strengthening of Ti3(Si, Al)C2 by Doping with Tungsten”, J. Am. Ceram. Soc. (2012)
[9] L. Y. Zheng, J. Y. Wang, J. X. Chen, M. Y. Liu, and Y. C. Zhou, “Preparation, Microstructure, and Mechanical Properties of Nb4AlC3-Nb5(Si, Al)3 composites”, J. Am. Ceram.
[10] H. Q. Nian, F. Z. Li, J. J. Li, J. Y. Wang and Y. C. Zhou, “Atomic-scale microstructure of Hf-Al-C ceramics”, J. Am. Ceram. Soc
[11] H. M. Xiang, F. Z. Li, J. J. Li, J. M. Wang, X. H. Wang, J. Y. Wang and Y. C. Zhou, “Raman spectrometry study of phase stability and phonon anharmonicity of Al3BC3 at elevated temperatures and high pressures”, J. Appl. Phys
[12] J. Zhang, J. Y. Wang and Y. C. Zhou, “Microstructure evolution of Zr2Al3C4 in Cu matrix”, J. Mater. Res.
[13] H. Ding, B. Xu, C. Ni, J. Y. Wang and X. J. Jin, “Monte Carlo simulation of B2-L21 ordering transitions in Au-Cu-Al alloy systems”, J. Shanghai Jiaotong Univ
[14] B. Liu, J. Y. Wang, F. Z. Li and Y. C. Zhou, Theoretical elastic stiffness, structural stability and thermal conductivity of La2T2O7 (T = Ge, Ti, Sn, Zr, Hf) pyrochlore, Acta Mater
[15] F. Z. li, B. Liu, J. Y. Wang and Y. C. Zhou, Hf3AlN: A novel layered ternary ceramic with excellent damage tolerance, J. Am. Ceram. Soc.
[16] H. Q. Nian, L. F. He, F. Z. Li, J. Y. Wang and Y. C. Zhou, Crystal structure and theoretical elastic property of a new ternary ceramic HfAl4C4, J. Am. Ceram. Soc
[17] L. Y. Zheng, J. M. Wang, X. P. Lu, F. Z. Li, J. Y. Wang and Y. C. Zhou, (Ti0.5Nb0.5)5AlC4: a new layered compound belonging to MAX phases, J. Am. Ceram. Soc
[18] L. F. He, J. J. Li, H. Q. Nian, X. H. Wang, Y. W. Bao, M. S. Li, J. Y. Wang and Y. C. Zhou, Oxidation behavior of ternary carbide ceramics in Hf-Al-C system in air, J. Am. Ceram. Soc
[19] C. F. Hu, L. F. He, L. Wu, J. Y. Wang, M. S. Li, Y. W. Bao and Y. C. Zhou, In situ reaction synthesis and mechanical properties of TaC-TaSi2 composites, Int. J. Appl. Ceram. Techno.
[20] J. Y. Wang and Y. C. Zhou, Recent Progress in theoretical prediction, preparation and characterization of layered ternary transition-metal carbides, Annu. Rev. Mater. Res
[21] B. Liu, J. Y. Wang, J. Zhang, J. M. Wang, F. Z. Li and Y. C. Zhou, Theoretical investigation of A-element atom diffusion in Ti2AC (A=Sn, Ga, Cd, In, and Pb), Appl. Phys. Lett
[22] L. F. He, Y. W. Bao, J. Y. Wang, M. S. Li and Y. C. Zhou, Microstructure and mechanical and thermal properties of ternary carbides in Hf-Al-C system, Acta Mater.
[23] T. Liao, J. Y. Wang, M. S. Li and Y. C. Zhou, First-principles study of oxygen incorporation and migration mechanisms in Ti2AlC, J. Mater. Res.
[24] J. M. Wang, J. Y. Wang, F. Z. Li and Y. C. Zhou, Relationship between layered crystal structure and mechanical properties of M3AlN (M=Zr and Hf): A first-principles investigation, J. Mater. Res.
[25] T. Liao, J. Y. Wang and Y. C. Zhou, Chemical bonding and mechanical properties of M2AC (M=Ti, V, Cr, A=Al, Si, P, S) ceramics from first-principles investigations, J. Mater. Res.
[26] J. Zhang, B. Liu, J. Y. Wang and Y. C. Zhou, Low-temperature instability of Ti2SnC: A combined transmission electron microscopy, differential scanning calorimetry, and x-ray diffraction investigations, J. Mater. Res
[27] L. F. He, X. P. Lu, Y. W. Bao, J. Y. Wang, and Y. C. Zhou, High-temperature internal friction, stiffness and strength of Zr-Al(Si)-C ceramics, Scripta Mater.
[28] L. F. He, H. B. Zhong, J. J. Xu, M. S. Li, Y. W. Bao, J. Y. Wang and Y. C. Zhou, Ultrahigh-temperature oxidation of Zr2Al3C4 via rapid induction heating, Scripta Mater.
[29] L. F. He, Y. W. Bao, J. Y. Wang, M. S. Li and Y. C. Zhou, Mechanical and Thermophysical Properties of Zr-Al-Si-C Ceramics, al. J. Am. Ceram. Soc.
[30] F. Z. Li, C. F. Hu, J.M.Wang, B. Liu, J. Y. Wang and Y. C. Zhou, Crystal Structure and Electronic Structure of a Novel Hf3AlN Ceramic, J. Am. Ceram. Soc
[31] T. Liao, G. Roma and J. Y. Wang, First-principles study of neutral silicon interstitials in 3C- and 4H-SiC, Phil. Mag.
[32] B. Liu, J. Y. Wang, F. Z. Li, Q. F. Tong and Y. C. Zhou, Atomic-scale studies of native point defect and nonstoichiometry in silicon oxynitride, J. Phys. Chem. Solid
[33] B. Liu, J. Y. Wang, F. Z. Li, H. Q. Nian and Y. C. Zhou, Effect of interstitial lithium atom on crystal structure and electronic structure of silicon oxynitride, J. Mater. Sc
[34] J. M. Wang, J. Y. Wang, Y. C. Zhou, and C. F. Hu, “Phase stability, electronic structure, and mechanical properties of ternary-layered carbide Nb4AlC3: an ab initio study”, Acta Mater.
[35] T. Liao, J. Y. Wang, and Y. C. Zhou, “First-principles investigation of intrinsic defects and (N,O) impurity atom stimulated Al vacancy in Ti2AlC”, Appl. Phys. Lett.
[36] J. Y. Wang, J. M. Wang, Y.C. Zhou, Z. J. Lin, and C. F. Hu, “Ab initio study of polymorphism in layered ternary carbides M4AlC3 (M=V, Nb and C)”, Scripta Mater
[37] J. Y. Wang, Y. C. Zhou, Z. J. Lin and T. Ohno, “Theoretical elastic stiffness of quaternary crystal Y3Si5N9O by first-principles investigation”, Phys. Rev. B
[38] J. Y. Wang, Y. C. Zhou, T. Liao, J. Zhang and Z. J. Lin, “Phase stability of Ti2AlC suffering Al vacancy by first-principles investigations”, Scripta Mate
[39] T. Liao, J. Y. Wang, and Y. C. Zhou, “Ab initio modeling of the formation and migration of monovacancies in Ti2AlC”，Scripta Mater
[40] J. M. Wang, J. Y. Wang and Y. C. Zhou, “Stable M2AlC (0001)-surface (M=Ti, V and Cr) by first-principles investigation”, J. Phys. Condens. Matter.
[41] Z. J. Lin, L. F. He, J. Y. Wang, M. S. Li, Y. W, Bao, and Y. C. Zhou, “Atomic-scale microstructure and elastic properties of quaternary Zr-Al-Si-C ceramics”, Acta Mater
[42] L. F. He, Y. W. Bao, M. S. Li, J. Y. Wang and Y. C. Zhou, “Oxidation of Zr2Al(Si)4C5 and Zr3Al(Si)4C6 in air”, J. Mater. Res.
[43] L. F. He, Z. J. Lin, Y. W. Bao, M. S. Li, J. Y. Wang and Y. C. Zhou, “Isothermal oxidation of bulk Zr2Al3C4 at 500-1000oC in air”, J. Mater. Res
[44] L.F. He, Y. W. Bao, J. Y. Wang, and Y. C. Zhou, “Improving the high-temperature oxidation resistance of Zr2Al3C4 by silicon pack cementation”, J. Mater. Res
[45] Z. J. Lin, M. S. Li, J. Y. Wang and Y. C. Zhou, “Influence of water vapor on the oxidation of Ti3AlC2 and Ti2AlC”, Scripta Mater.
[46] L. F. He, Z. J. Lin, J. Y. Wang, Y. W. Bao, Y. C. Zhou, “Crystal structure and theoretical elastic property of two new ternary ceramics Hf3Al4C6 and Hf2Al4C5”, Scripta Mater.
[47] C. F. Hu, L. F. He, M. Y. Liu, X. H. Wang, J. Y. Wang, M. S. Li, Y. W. Bao and Y. C. Zhou, “In Situ Reaction Synthesis and Mechanical Properties of V2AlC”, J. Am. Ceram. Soc
[48] C. F. Hu, J. Zhang, J. M. Wang, F. Z. Li, J. Y. Wang and Y. C. Zhou, “Crystal structure of V4AlC3, a new layered ternary carbide”, J. Am. Ceram. Soc
[49] Z. Q. Sun, Y.C. Zhou, J. Y. Wang, and M.S. Li, “Thermal properties and thermal shock resistance of gamma-Y2Si2O7”, J. Am. Ceram. Soc
[50] C. F. Hu, F. Z. Li, L. F. He, M. Y. Liu, J. Zhang, J. M. Wang, Y. W. Bao, J. Y. Wang, and Y. C. Zhou, “In situ reaction synthesis, electrical and thermal, and mechanical properties of Nb4AlC3”, J. Am. Ceram. Soc.
[51] F. Z. Li, Y. C. Zhou, L. F. He, B. Liu, J. Y. Wang, “Synthesis, microstructure, and mechanical properties of Al3BC3”, J. Am. Ceram. Soc.
[52] Q. F. Tong, J. Y. Wang, Z. P. Li and Y. C. Zhou, “Preparation and properties of Si2N2O/b-cristobalite composites”, J. Europ. Ceram. Soc.
[53] C. F. Hu, L. F. He, J. Zhang, Y. W. Bao, J. Y. Wang, M. S. Li and Y. C. Zhou, “Microstructure and properties of bulk Ta2AlC ceramic synthesized by an in situ reaction/hot pressing method”, J. Europ. Ceram. Soc
[54] Z. Q. Sun, J. Y. Wang, M.S. Li, and Y.C. Zhou, “Mechanical properties and damage tolerance of Y2SiO5”, J. Europ. Ceram. Soc
[55] Q. F. Tong, Y. C. Zhou, J. Zhang, J. Y. Wang, M. S. Li, Z. P. Li, “Preparation and properties of machinable Si2N2O/BN composites”, Int. J. Appl. Ceram. Techno
[56] C. F. Hu, J. Zhang, Y. W. Bao, J. Y. Wang and Y. C. Zhou, “In-situ reaction synthesis and decomposition of Ta2AlC”, Int. J. Mater. Res.
[57] B. Liu, J. Y. Wang, Y. C. Zhou, F. Z. Li, “Temperature dependence of elastic properties for amorphous SiO2 by molecular dynamics simulation”, Chin. Phys. Lett.
[58] B. Liu, J.Y. Wang, Y.C. Zhou, T. Liao, F.Z. Li, “Theoretical elastic stiffness, structure stability and thermal conductivity of La2Zr2O7 pyrochlore” Acta Mater.
[59] J. Y. Wang, Y. C. Zhou and J. Z. Lin “Mechanical properties and atomistic deformation mechanism of g-Y2Si2O7 from first-principles investigations” Acta Mater.
[60] J. Y. Wang, Y. C. Zhou, T. Liao, Z. J. Lin, “Trend in crystal structure of layered ternary T-Al-C carbides (T=Sc, Ti, V, Cr, Zr, Nb, Mo, Hf, W and Ta)” J. Mater. Res
[61] J. Zhang, Y. C. Zhou and J. Y. Wang, “Structure stability of Ti3AlC2 in Cu and microstructure evolution of Cu-Ti3AlC2 composites” Acta Mater
[62] Z. J. Lin, M. S. Li, J. Y. Wang and Y. C. Zhou, “High-temperature oxidation and hot corrosion of Cr2AlC” Acta Mater
[63] Z. J. Lin, M. J. Zhuo, M. S. Li, J. Y. Wang, and Y. C. Zhou, “Synthesis and microstructure of layered-ternary Ti2AlN ceramic” Scripta Mater.
[64] C. F. Hu, F. Z. Li, J. Zhang, J. M.. Wang, J. Y. Wang, and Y. C. Zhou, “Nb4AlC3, a new compound belonging to the MAX phases” Scripta Mater.
[65] Z. J. Lin, L. F. He, M. S. Li, J. Y. Wang and Y. C. Zhou “Layered stacking characteristic of ternary zirconium aluminum carbides”, J. Mater. Res
[66] L. F. He, J. Y. Wang, Y. W. Bao and Y. C. Zhou “Elastic and thermal properties of Zr2Al3C4: experimental investigation and ab initio calculation”, J. Appl. Phy
[67] L. F. He, Y. C. Zhou, Y. W. Bao, Z. J. Lin and J. Y. Wang, “Synthesis, physical and mechanical properties of bulk Zr3AL3C5 ceramic”, J. Am. Ceram. Soc
[68] Z. Q. Sun, Y. C. Zhou, M. S. Li and J. Y. Wang, “g-Y2Si2O7, a novel machinable silicate ceramic: mechanical properties and mchinability”, J. Am. Ceram. Soc
[69] C. F. Hu, Z. J. Lin, L. F. He, Y. W. Bao, J. Y. Wang, M. S. Li and Y. C. Zhou, “Physical and mechanical properties of bulk Ta4AlC3 ceramic prepared by an in-situ reaction synthesis/hot pressing method”, J. Am. Ceram. Soc
[70] L. F. He, Z. J. Lin, J. Y. Wang, Y. W. Bao, M. S. Li, Y. C. Zhou, “Synthesis and characterization of bulk Zr2Al3C4 ceramic” J. Am. Ceram. Soc
[71] Z. J. Lin, M. S. Li, J. Y. Wang and Y. C. Zhou, “Microstructure and High-Temperature Corrosion Behavior of a Cr–Al–C Composite”, J. Am. Ceram. Soc.
[72] Q. F. Tong, J. Y. Wang and Y. C. Zhou “Low temperature synthesis /densification and properties of Si2N2O with Li2O additive”, J. Europ. Ceram. So
[73] L. F. He, Y. C. Zhou, Y. W. Bao and J. Y. Wang, “Synthesis and oxidation of Zr3Al3C5 powders”, Inter. J. Mater. Res
[74] J. Y. Wang, Y. C. Zhou, T. Liao and Z. J. Lin, “First-principles prediction of low shear-strain resistance of Al3BC3: a metal borocarbide containing short linear C-B-C units”, Appl. Phys. Lett.
[75] J. Y. Wang, Y. C. Zhou, Z. J. Lin, T. Liao and L. F. He, “First-principles prediction of mechanical properties and electronic structure of ternary aluminum carbide Zr3Al3C5”, Phys. Re
[76] J. Y. Wang, Y. C. Zhou, Z. J. Lin and T. Liao, “Pressure-induced polymorphism in Al3BC3: a First-principles study”, Rapid Communication, J. Solid State Chem
[77] T. Liao, J. Y. Wang and Y. C. Zhou, “Deformation modes and ideal strengths of ternary layered Ti2AlC and Ti2AlN from first-principles calculations” Phys. Rev
[78] T. Liao, J. Y. Wang and Y. C. Zhou, “Atomistic deformation modes and intrinsic brittleness of Al4SiC4: a first-principles investigation” Phys. Rev. B
[79] T. Liao, J. Y. Wang and Y. C. Zhou, “Basal plane slip systems and polymorphic phase transformation in Ti2AlC and Ti2AlN: a first-principles study”, J. Phys.: Condens. Matter
[80] T. Liao, J. Y. Wang and Y. C. Zhou, “Superior mechanical properties of Nb2AsC to those of other layered ternary carbides: a first-principles study”, J. Phys.: Condens. Matte
[81] Y. C. Zhou, J. X. Chen and J. Y. Wang, “Strengthening of Ti3AlC2 by incorporation of Si to form Ti3Al1-xSixC2 solid solution”, Acta Mater.
[82] Z. J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang, “Microstructural characterization of layered ternary Ti2AlC”, Acta Mater.
[83] Z. J. Lin, M. J. Zhuo, L. F. He, Y. C. Zhou, M. S. Li and J. Y. Wang, “ Atomic-scale microstructures of Zr2Al3C4 and Zr3Al3C5 ceramics”, Acta Mater
[84] Z. J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang, “Interfacial microstructure of Ti3AlC2 and Al2O3 oxide scale”, Scripta Mater
[85] Z. J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang, “Microstructural relationships between compounds in the Ti-Si-C system”, Scripta Mater.
[86] Z. J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang, “Atomic scale characterization of layered ternary Cr2AlC ceramic”, J. Appl. Phys
[87] H. B. Zhang, Y. C. Zhou,Y. W. Bao, J. Y. Wang, “Oxidation behavior of bulk Ti3SiC2 at intermediate temperatures in dry air”, J. Mater. Res
[88] Z. J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang, “Structural characterization of a new layered-ternary Ta4AlC3”, J. Mater. Res
[89] Y. C. Zhou, D. T. Wan, Y. W. Bao and J. Y. Wang, “In situ processing and high-temperature properties of Ti3Si(Al)C2/SiC composites”, Int. J. Appl. Ceram. Technol
[90] J. Y. Wu, Y. C. Zhou, and J. Y. Wang, “Tribological behavior of Ti2SnC particulate reinforced copper matrix composites”, Mater. Sci. Eng. A
[91] H. B. Zhang, Y. C. Zhou, Y. W. Bao, M. S. Li and J. Y. Wang, “Intermediate phase in synthesis of Ti3SiC2 and Ti3Si(Al)C2 solid solutions from elemental powders”, J. Eur. Ceram. Soc
[92] Z. J. Lin, Y. C. Zhou, M. S. Li and J. Y. Wang, “Hot corrosion and protection of Ti2AlC against NaSO4 salt in air”, J. Eur. Ceram. Soc
[93] Z. J. Lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang, “Microstructures and adhesion of the oxide scale formed on titanium aluminum carbide substrates”, J. Am. Ceram.
[94] Z. J. lin, M. J. Zhuo, Y. C. Zhou, M. S. Li and J. Y. Wang, “Microstructures and theoretical bulk modulus of layered ternary tantalum aluminum carbides” J. Am. Ceram
[95] Z. J. Lin, Y. C. Zhou, M. S. Li and J. Y. Wang, “Improving the NaSO4-induced corrosion resistance of Ti3AlC2 by pre-oxidation in air”, Corrosion Science
[96] X. G. Liu, X. W. Wang, J. Y. Wang and H. Y. Zhang, “Effect of interstitial hydrogen on cohesive strength of Al grain boundary with Mg segregation”, J. Mater.
[97] J. Y. Wang, Y. C. Zhou, Z. J. Lin, “First-principles elastic stiffness of LaPO4 monazite”, Appl. Phys
[98] J. Y. Wang, Y. C. Zhou, Z. J. Lin, F. L. Meng and F. Li, “Raman active phonon modes and heat capacities of Ti2AlC and Cr2AlC: first-principles and experimental investigations”, Appl. Phys. Lett. 86, 101902 (2005)
[99] J. Y. Wang, Y. C. Zhou, Z. J. Lin and T. Liao, “First-principles investigation on chemical bonding and bulk modulus of the ternary carbide Zr2Al3C5”, Phys. Rev
[100] X. G. Liu, X. W. Wang, J. Y. Wang and H. W. Zhang, “First-principles investigation of Mg segregation at Σ = 11(113) grain boundary in Al”, J. Phys.: Condens. Matter
[101] F. L. Meng, Y. C. Zhou and J. Y. Wang, “Strengthening of Ti2AlC by substituting Ti with V”, Scripta Mater.
[102] Z. J. Lin, Y. C. Zhou, M. S. Li and J. Y. Wang, “In-situ hot pressing/solid-liquid reaction synthesis of bulk Cr2AlC”, Z. METALLKD
[103] J. Y. Wu, Y. C. Zhou, J. Y. Wang, W. Wang and C. K. Yan, “Interfacial reaction between Cu and Ti2SnC during processing of Cu-Ti2SnC composite”, Z. METALLKD
[104] E. D. Wu, J. Y. Wang, H. B. Zhang, Y. C. Zhou, K. Sun and Y. J. Xue, “Neutron diffraction studies of Ti3Si0.9Al0.1C2 compound”, Mater. Lett.
[105] J. Y. Wang and Y. C. Zhou, “Dependence of elastic stiffness on electronic band structure of nano-laminate M2AlC (M =Ti, V, Nb and Cr) ceramics”, Phys. Rev
[106] J. Y. Wang and Y. C. Zhou, “Polymorphism of Ti3SiC2 ceramic: first-principles investigations”, Phys. Rev.
[107] J. Y. Wang and Y. C. Zhou, “Ab initio elastic stiffness of nano-laminate (MxM’2-x)AlC (M and M’=Ti, V and Cr) solid solution”, J. Phys.: Condens. Matter
[108] R. Z. Huang, Y. M. Wang, J. Y. Wang and Y. C. Zhou, “First-principles investigation of the stability and electronic structure of ZrV2Hx (x=0.5,1, 2, 3, 4, 6 and 7)”, Acta Mater
[109] X. W. Wang, J. Y. Wang, P. Wu and H. W. Zhang, “The investigation of internal friction and elastic modulus in surface nanostructured materials”, Mater. Sci. Eng
[110] Y. C. Zhou, H. B. Zhang, M. Y. Liu, J. Y. Wang and Y. W. Bao, “Preparation of TiC free Ti3SiC2 with improved oxidation resistance by substitution of Si with Al”, Mater. Res. Innov
[111] C. H. Zhang, S. L. Zhang, X. W. Wang and J. Y. Wang, “Electron correlation in the final continuum of ionization hydrogen by 150-eV electron impact”, Chin. Phys. Lett., Vol
[112] X. W. Wang, J. Y. Wang, L. Y. Xiong, G. Liu, “Defect characteristics in the surface and nanocrystallined material treated by high-energy shot peening”, Materials Science Forum, Vol
[113] J. Y. Wang and Y. C. Zhou, “First-principles study of equilibrium properties and electronic structure of Ti3Si0.75Al0.25C2 solid solution”, J. Phys.: Condens. Matter
[114] J. Y. Wang and Y. C. Zhou, “Ab initio investigation of the electronic structure and bonding properties of the layered ternary compound Ti3SiC2 at high pressure”, J. Phys.: Condens. Matter
國際會議報告
【1】 “Ab initio elastic stiffness of nano-laminate (MxM’1-x)AlC (M and M’=Ti, V and Cr) solid solution”, Fourth International Conference on Inorganic Materials, Antwerp, Belgium, 2004
【2】 “Elastic stiffness and mechanism of shear deformation of monoclinic LaPO4 by first-principles investigation”, The 107th Annual Meeting of the American Ceramic Society, Baltimore, U. S. A., 2005
【3】 “Chemical bonding and elastic stiffness of ternary zirconium aluminum carbides by first-principles investigations”, The 6th Pacific Rim Conference on Ceramic and Glass Technology, Hawaii, U. S. A., 2005
【4】 “Ideal tensile and shear strength of ternary and binary ceramics by first principles investigation”, The Fourth China International Conference on High-performance Ceramics, Chengdu, China, 2005
【5】 “Atomistic deformation modes of nano-Laminate ternary transition-metal aluminumcarbides by first-Principles investigation”, The 30th International Conference and Exposition on Advanced Ceramics and Composite, Cocoa Beach, Florida, U. S. A., 2006
【6】 “Pressure-induced polymorphism in Al3BC3: a first-principles study”, Material Science & Technology 2006 Conference and Exhibition (MS&T’06), Cincinnati, Ohio, U. S. A., 2006
【7】 “Elastic stiffness and deformation mechanism of Y2Si2O7 by first-principles study”, Material Science & Technology 2006 Conference and Exhibition (MS&T’06), Cincinnati, Ohio, U. S. A., 2006
【8】 “Tailoring mechanical properties of layered ternary MAX compounds by first-principles investigation”, (Invited), 31st International Cocoa Beach Conference & Exposition on Advanced Ceramics & Composites, Daytona Beach, Florida, U. S. A. 2007
【9】 “Prediction of a new damage tolerant ceramic, Y2SiO5, by first-principles investigations”, Material Science & Technology 2007 Conference and Exhibition (MS&T’07), Detroit, Michigan, U. S. A., 2007
【10】 “Tailor-made mechanical properties of MAX phases from first-principles investigations”, 2nd International symposium on SiAlONs and non-oxides, Ise-Shima, Japan 2007.
【11】 “Making ceramics intrinsic “ductile”- predictions from first-principles calculation”, (Invited), 32st international cocoa beach conference & exposition on advanced ceramics & composites, Daytona Beach, Florida, U.S.A. Jan. 2008
【12】 “New developments on understanding the mechanical property, phase stability and defects of layered ternary compounds using first-principles calculation”, (Invited), 33rd international cocoa beach conference & exposition on advanced ceramics & composites, Daytona Beach, Florida, U.S.A. Jan. 2009
【13】 “Making high-temperature ceramics intrinsic “ductile” – Predictions from first-principles calculation”, (Invited), 8th pacific rim conference on ceramic and glass technology, Vancouver, Canada, May, 2009
【14】 “Development of new layered ternary nitrides, Hf3AlN and Zr3AlN, from experimental and theoretical investigations”, 6th international conference on nitrides and related materials, Karlsruhe, Germany, March, 2009
【15】 “Design new layered ternary carbides by control of bonding heterougeneity”, (Invited), 34th international cocoa beach conference & exposition on advanced ceramics & composites, Daytona Beach, Florida, U.S.A. Jan. 2010
【16】 “Structure and property control of ternary compounds”, (Invited), 12th international ceramics congress, Montecatini Terme, Tuscany, Italy, June, 2010
【17】 “Understanding the mechanisms of defects in MAX phases”, (Invited), 7th international conference on high temperature ceramic matrix composites, Bayreuth, Germany, Sep. 2010
【18】 “Design, Structure and Properties of Nano-layered Damage Tolerant Transition-metal Carbides and Nitrides”, (Invited), 3rd international congress on ceramics, Osaka, Japan, Nov. 2010
【19】 “Materials design for low thermal conductivity ceramics”, (Invited), 35th International Conference and exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, USA., January, 2011
【20】 “Understanding the Mechanisms of Point Defects in MAX phases”, (Invited), The 9th International Meeting of Pacific RIM Ceramic Societies, Cairns, Queensland, Australia, July, 2011
【21】 “Phase stability of Al3BC3: first-principles calculation and in situ Raman experiments”, (Invited), 36th International Conference and exposition on Advanced Ceramics and Composites, Daytona Beach, Florida, USA., January, 2012
【22】 “Complex silicides with extremely low thermal conductivity”, (Invited), International Symposium on New Frontier of Advanced Si-Based Ceramics and Composites (ISASC 2012), Seoul, Korea, March, 2012
【23】 “Searching for new thermal barrier ceramics: from theoretical prediction to experimental development”, (Invited), 10th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications, Dresden, Germany, May, 2012
國際會議任職
【1】 美國陶瓷學會主辦的“國際先進陶瓷與複合材料會議（ICACC）”系列年會中任分會的組織者和主席。
【2】 美國陶瓷學會主辦的“太平洋地區陶瓷與玻璃國際會議（PACRIM）”系列會議中任分會的組織者和主席。
獲得專利
[1] 一種無TiC雜質的Ti3SiC2材料的製備方法
發明人：周延春 張海斌 劉明月 閆程科 王京陽
[2] 一種原位熱壓/固-液相反應製備鉻鋁碳塊體材料的方法
發明人：周延春 林志軍 李美栓 王京陽
[3] 一種釔矽氧氮-氮化硼陶瓷基複合材料及其製備方法
發明人: 陳繼新、陳琳、周延春、孫魯超、王京陽
[4] 一種以叔丁醇冷凍升華法製備多孔陶瓷的方法
發明人：周延春、李端陽、李美栓、陳繼新、王曉輝、王京陽
[5] 一種利用微波法製備Y4Si2O7N2粉體材料的方法
發明人：周延春、孫魯超、王京陽
[6] 一種原位反應製備釔矽氧氮陶瓷材料的方法
發明人：周延春、孫魯超、王京陽
[7] 一種原位反應製備鑥矽氧塊體陶瓷材料的方法
發明人：王京陽 田志林
[8] 一種原位反應製備鑥矽氧粉體陶瓷材料的方法
發明人：王京陽 田志林
[9] 一種原位反應製備鑥矽氧氮陶瓷材料的方法
發明人：王京陽 孫魯超
[10] 一種釔矽氧多孔高溫陶瓷材料的製備方法，
發明人：王京陽 吳貞
